Category
Renofix 60 - UNIVERSAL PLASTER FOR BASIC COARSE/ROUGH TREATMENT
Can be used on facades, internal walls and in rooms susceptible to moisture. For manual use, one sack of Renofix 60 is mixed with 8-9 litres of clean water for two minutes. The wall area needs to be cleaned of dust, waste and grease. Minimum thickness of the layer should be 15 mm.
more »
Renofix 70 - SPRAY PLASTER FOR COARSE MADE CONCRETE FOUNDATION AND POROUS BRICKS
Can be used as a spray plaster for all types of walls. Not to be used on soft foundations (porous concrete or hollow bricks). For manual application, one sack of Renofix 70 is mixed with 9 litres of water and spread with a trowel. The plaster can be sprayed with a mechanical applicator.
more »
Renofix 75 - LIME-CEMENT PLASTER FOR BUILDING
With this plaster you save time in applying the sand, cement, and the lime. The lime-cement plaster is 0,3 mm. Plaster group II. It is mixed only with water and should never be mixed with other materials. It is used in manual plastering and construction. It is adequate for all renovation work.
more »
Renofix 970 - SCREED CEMENT
For dry screed on cement foundations and lime sand with a 0-3 mm granulation. It improves the quality of your work. It is produced using modern technology and with it you gain elasticity in your cement layer. For manual treatment one sack of Renofix 970 is mixed with 4 litres of water.
more »
Renofix 90 - BASIC PLASTER FOR PRELIMINARY TREATMENT AND INTERIOR FELT
To be used as a basic felt plaster for internal areas. It is not for use in wet/moist areas. For manual plastering one sack of Renofix 90 is mixed with 9 to 10 litres of clean water for approximately 2 minutes and then spread with sand.
more »
Renofix 100 - INTERNAL PLASTER FOR COVERING AND LEVELLING
To be used as a basic sand plaster and sand layer for internal surfaces. It is not suitable for wet/moist surfaces. One sack Renofix 100 is mixed with 10 to 11 litres of pure clean water. The Skure-Tech S4 is used for machine plastering and levelling using an aluminium leveller.
more »
Renofix 200 - MIXTURE FOR SANDING INTERNAL AREAS THAT HAVE BEEN PREVIOUSLY PLASTERED
The mixture for sanding walls previously plastered or constructed from gypsum plasterboard. One sack Renofix 200 is mixed in 12-13 litres of water. Remains able to be spread for 40 to 50 minutes. The thickness of the plaster should be 1-5 mm.
more »
Renofix 202 - SAND LAYER WITH LIME BASELINE FOR LEVELLING/SANDING
A sand layer, for levelling (sanding) internal wall areas, previously plastered with basic plaster (gypsum/lime/cement) and gypsum plasterboard. One sack of Renofix 202 is poured slowly into 12 to 13 litres of clean water and is mixed.
more »
Renofix 220 - LIGHT PLASTER FOR TREATMENT OF INTERNAL WALLS WITH PERLIT
Light layer of lime baseline for ceilings and internal concrete walls. One sack of Renofix 220 is poured into 10 to11 litres of water and is mixed. The Skure-Tech S4 is used for machine plastering afterwards levelling is required as is sanding. The thickness of the plaster should be 8 to 10 mm.
more »
Renofix 10 - BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS
To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering.
more »
Renofix 12 - MATERIAL FOR FINE TREATMENT
Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water.
more »
Renofix 12 WHITE - MATERIAL FOR FINE TREATMENT - WHITE
Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water.
more »
Renofix 20 - BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS
To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering.
more »
Renofix 66 - LIGHT PERLIT PLASTER FOR FAÇADE AND INTERNAL WALLS WITH TERMOISOLATION
Light perlit plaster for façade, interior and exterior walls. For manual plastering 1 sack of Renofix 66 is mixed with 8 to 9 litres of clean water for 2 minutes and spread with sand. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease.
more »
POLYSTYROL
1.RENOFIX 5, CEMENT CONSTRUCTIVE GLUE
Glue for plate
2.POLYSTYROL PLATE
Fire retardent
more »
MINERAL WOOL
1.RENOFIX 5
Glue for plate
2.PLATE OF MINERAL WOOL
Mineral, inflamable
more »
Renofix 360 - STRUCTURAL OVER LAYER OF PLASTER (ABRIB) FOR INNER WALLS
Structural over laying white plaster (abrib) for inner walls and ceiling areas, previously treated with cement-lime, gypsum-lime etc. Renofix 360 is mixed with 8 litres of clean water; 10 minutes before use it should be stirred again.
more »
Renofix 370 - MINERAL STRUCTURAL MORTAR (ABRIB) FOR WALLS
Mineral based construction material in a cream colour for comfortable and healthy living. Can be used for all exterior and inner surfaces. Renofix 370 consists of lime, hydrated lime, white cement and joint/bonding components for good adhesion to surfaces.
more »
Renofix 700 - MINERAL STRUCTURAL PLASTER (ABRIB) FOR WALLS
Mineral based construction material for comfortable and healthy living. Renofix 700 is a modern construction material of a high quality. It is a mineral construction material for the over layer façade both outside and inside. Components include hydrated lime, white cement and marble white sand.
more »