Skip to Content

Renofix 5

Is used for affixing insulation plates,as a meterial for levelling concrete surfaces and as an adhersive for levelling the Renotherm 50 thermal system.It can also be used as an adhesive for cement plaster on smooth concrete surfaces,stones,ceramic tiles and granite slabs.One sack of Renofix5 is mixed with 7 to 7,5 litres of clean wather for 2 minutes.The minimum functional temperature is 5C.
ROFIX-5

READ MORE

Renofix 5 STANDARD – CONSTRUCTIVE GLUE-CEMENT MATERIAL FOR LEVELLING

Is used for affixing insulation plates, as a material for levelling concrete surfaces and as an adhesive for levelling the Renotherm 50 thermal system. It can also be used as an adhesive for cement plaster on smooth concrete surfaces, stones, ceramic tiles and granite slabs. One sack of Renofix 5 STANDARD is mixed with 7 to 7,5 litres of clean water for 2 minutes. The minimum functional temperature is 5°C.
Technical Sheet
Renofix-5-Standard
READ MORE

Renofix 5 WHITE – CONSTRUCTIVE GLUE-CEMENT MATERIAL FOR LEVELLING

Is used for affixing insulation plates, as a material for levelling concrete surfaces and as an adhesive for levelling the Renotherm 50 thermal system. It can also be used as an adhesive for cement plaster on smooth concrete surfaces, stones, ceramic tiles and granite slabs. One sack of Renofix 5 WHITE is mixed with 7 to 7,5 litres of clean water for 2 minutes. The minimum functional temperature is 5°C.
Technical Sheet
ROFIX-5-Bardh
READ MORE

Renofix 15 – GLUE FOR STONE AND CERAMIC TILES ON WALL AND FLOOR SURFACES

An adhesive to be used for attaching stone and ceramic tiles onto wall and floor surfaces. To be used for inner and outer plastered surfaces with cement plaster, lime plaster, concrete surfaces or walls of gypsum plasterboard. The base should be clean, dry and the weight supported. It is mixed with a maximum of 7,5 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Store in a dry place.
Technical Sheet
Renofix-15
READ MORE

Renofix 15 STANDARD – GLUE FOR STONE AND CERAMIC TILES ON WALL AND FLOOR SURFACES

An adhesive to be used for attaching stone and ceramic tiles onto wall and floor surfaces. To be used for inner and outer plastered surfaces with cement plaster, lime plaster, concrete surfaces or walls of gypsum plasterboard. The base should be clean, dry and the weight supported. It is mixed with a maximum of 6,5 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Store in a dry place.
Technical Sheet
Renofix-15-Standard
READ MORE

Renofix 15 WHITE – GLUE FOR STONE AND CERAMIC TILES ON WALL AND FLOOR SURFACES

An adhesive to be used for attaching stone and ceramic tiles onto wall and floor surfaces. To be used for inner and outer plastered surfaces with cement plaster, lime plaster, concrete surfaces or walls of gypsum plasterboard. The base should be clean, dry and the weight supported. It is mixed with a maximum of 6,5 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Store in a dry place.
Technical Sheet
Renofix-15-Bardh
READ MORE

Renoflex GRAY – FLEXIBLE THINLAYER GLUE FOR CERAMIC TILES

This product is an adhesive for stone and ceramic tiles when affixing them to wall and floor surfaces. It is used for affixing ceramic tiles over tiles and for exterior surfaces plastered with cement plaster, lime plaster, concrete surfaces and walls with gypsum plasterboard etc. It is mixed with a maximum of 6,5 to 7 litres of clean water. The minimum functional temperature is 5°C. The product expires after 6 months. Store in a dry place. Ensure that the technical manual is followed.
Technical Sheet
RENOFLEX
READ MORE

Renoflex WHITE – FLEXIBLE THINLAYER GLUE FOR CERAMIC TILES

This product is an adhesive for stone and ceramic tiles when affixing them to wall and floor surfaces. It is used for affixing ceramic tiles over tiles and for exterior surfaces plastered with cement plaster, lime plaster, concrete surfaces and walls with gypsum plasterboard etc. It is mixed with a maximum of 6,5 to 7 litres of clean water. The minimum functional temperature is 5°C. The product expires after 6 months. Store in a dry place. Ensure that the technical manual is followed.
Technical Sheet
RENOFLEX
READ MORE

Renofix 50 white – POLYSTEROL GLUE & LEVELING MATERIAL

Styroporkleber It`s used for gluing Polisterol tiles ,wool stone and reinforces mesh and its
glue for stone tiles, marble granite and ceramic, as well as leveler material for thermic
system Renotherm W50,and adhesive for cement mortar polished concrete. A sack of
Renofix 50 is mixed with 7-7.5 l .clean water for 2 min. And 10 min before use is mixed
one more time. When used as adhesive Renofix 50 in full or striped surface,
with trowel put it on thermal plate and then,is attached on the wall. When it is used as
tile glue Renofix 50 it`s pulled by cogwheels trowel.Must be used within two hours,
Should not be mixed with other materials.Not appropriate for use below +5ºC.Must be kept dry.
Durability 6 months. Must be used confirm to technical manual.

READ MORE

Renofix 50 GRAY – POLYSTEROL GLUE & LEVELING MATERIAL

Styroporkleber It`s used for gluing Polisterol tiles ,wool stone and reinforces mesh and its
glue for stone tiles, marble granite and ceramic, as well as leveler material for thermic
system Renotherm W50,and adhesive for cement mortar polished concrete. A sack of
Renofix 50 is mixed with 7-7.5 l .clean water for 2 min. And 10 min before use is mixed
one more time. When used as adhesive Renofix 50 in full or striped surface,
with trowel put it on thermal plate and then,is attached on the wall. When it is used as
tile glue Renofix 50 it`s pulled by cogwheels trowel.Must be used within two hours,
Should not be mixed with other materials.Not appropriate for use below +5ºC.Must be kept dry.
Durability 6 months. Must be used confirm to technical manual.

READ MORE