Skip to Content

Renofix 66 – LIGHT PERLIT PLASTER FOR FAÇADE AND INTERNAL WALLS WITH TERMOISOLATION

Light perlit plaster for façade, interior and exterior walls. For manual plastering 1 sack of Renofix 66 is mixed with 8 to 9 litres of clean water for 2 minutes and spread with sand. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. Product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

Renofix-66

READ MORE

Renofix 20 – BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS

To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. The product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

RENOFIX-20

READ MORE

Renofix 12 WHITE – MATERIAL FOR FINE TREATMENT WHITE

Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Do not mix with other materials. Store in a dry place. Ensure the technical manual is followed.

Technical sheet

ROFIX-12-Bardh

READ MORE

Renofix 12 – MATERIAL FOR FINE TREATMENT

Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Do not mix with other materials. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

ROFIX-12

READ MORE

Renofix 10 – BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS

To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. The product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

RENOFIX-10

READ MORE