Skip to Content

Renofix 10 – BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS

To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. The product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

RENOFIX-10

READ MORE

Renofix 10 WHITE – BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS

To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. The product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

RENOFIX-10

READ MORE

Renofix 60 GRAY – UNIVERSAL PLASTER FOR BASIC COARSE/ROUGH TREATMENT

Can be used on facades, internal walls and in rooms susceptible to moisture. For manual use, one sack of Renofix 60 is mixed with 8-9 litres of clean water for two minutes. The wall area needs to be cleaned of dust, waste and grease. Minimum thickness of the layer should be 15 mm. Do not mix with other materials. Store in a dry place. Product expires after 6 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.

Теchnical sheet

Renofix 60 Flete Teknike

Statement

READ MORE

Renofix 20 GRAY – BASIC CEMENT WATERPROOF PLASTER FOR MOIST WALLS

To be used on facades and as plaster for base (foot). For internal walls and ceilings in wet and cold rooms, for manhole covers and concrete walls. For manual plastering one sack of Renofix 20 is mixed with 9 litres of water. The Skure-Tech S4 is used for machine plastering. The area of the walls must be cleaned from dust, waste and grease. On smooth concrete areas Renofix 5 construction glue must be used as a joint plaster. The minimum thickness is 10 mm. Do not mix with other materials. The minimum functional temperature is 5°C. The product will expire after 6 months. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

RENOFIX-20

READ MORE

Renofix 90 GRAY – BASIC PLASTER FOR PRELIMINARY TREATMENT AND INTERIOR FELT

To be used as a basic felt plaster for internal areas. It is not for use in wet/moist areas. For manual plastering one sack of Renofix 90 is mixed with 9 to 10 litres of clean water for approximately 2 minutes and then spread with sand. The Skure-Tech S4 is used for machine plastering and levelled using an aluminium leveller. Minimum thickness is 10 mm for the walls and 7 mm for ceilings. The minimum functional temperature is 5°C.

Technical Sheet

RENOFIX-90

READ MORE

Renofix 70 GRAY – SPRAY PLASTER FOR COARSE MADE CONCRETE FOUNDATION AND POROUS BRICKS

 Can be used as a spray plaster for all types of walls. Not to be used on soft foundations (porous concrete or hollow bricks). For manual application, one sack of Renofix 70 is mixed with 9 litres of water and spread with a trowel. The plaster can be sprayed with a mechanical applicator. With Renofix 70 you can cover 60% of the wall area. The wall area must be cleaned of dust, waste and grease. Store in a dry place. Product expires after 3 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.

Technical Sheet

RENOFIX-70

READ MORE

Renofix 100 GRAY – INTERNAL PLASTER FOR COVERING AND LEVELLING

To be used as a basic sand plaster and sand layer for internal surfaces. It is not suitable for wet/moist surfaces. One sack Renofix 100 is mixed with 10 to 11 litres of pure clean water. The Skure-Tech S4 is used for machine plastering and levelling using an aluminium leveller. Minimum thickness is 10 mm for the walls and 7 mm for the ceilings. The minimum functional temperature is +5°C.

Technical Sheet

RENOFIX-100

READ MORE

Renofix 75 GRAY – LIME-CEMENT PLASTER FOR BUILDING

With this plaster you save time in applying the sand, cement, and the lime. The lime-cement plaster is 0,3 mm. Plaster group II. It is mixed only with water and should never be mixed with other materials. It is used in manual plastering and construction. It is adequate for all renovation work. A sack of Renofix 75 is mixed with 10 litres of water. After 2 minutes have passed it is ready for use. The wall area must be cleaned from dust, waste and grease. Store in a dry place. Product will expire after 3 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.

Technical Sheet

RENOFIX-75

 

READ MORE

Renofix 12 GRAY – MATERIAL FOR FINE TREATMENT

Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Do not mix with other materials. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

ROFIX-12

READ MORE

Renofix 12 WHITE – MATERIAL FOR FINE TREATMENT WHITE

Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Do not mix with other materials. Store in a dry place. Ensure the technical manual is followed.

Technical sheet

ROFIX-12-Bardh

READ MORE

Renofix 970 GRAY – SCREED CEMENT

For dry screed on cement foundations and lime sand with a 0-3 mm granulation. It improves the quality of your work. It is produced using modern technology and with it you gain elasticity in your cement layer. For manual treatment one sack of Renofix 970 is mixed with 4 litres of water. It can be mixed manually or automatically. Renofix 970 should be used within one hour of mixing. Then it has to be levelled and sanded. The minimum functional temperature is 5°C.

Technical Sheet

RENOFIX-970

READ MORE

Renofix 5

Is used for affixing insulation plates,as a meterial for levelling concrete surfaces and as an adhersive for levelling the Renotherm 50 thermal system.It can also be used as an adhesive for cement plaster on smooth concrete surfaces,stones,ceramic tiles and granite slabs.One sack of Renofix5 is mixed with 7 to 7,5 litres of clean wather for 2 minutes.The minimum functional temperature is 5C.
ROFIX-5

READ MORE

Renofix 5 STANDARD – CONSTRUCTIVE GLUE-CEMENT MATERIAL FOR LEVELLING

Is used for affixing insulation plates, as a material for levelling concrete surfaces and as an adhesive for levelling the Renotherm 50 thermal system. It can also be used as an adhesive for cement plaster on smooth concrete surfaces, stones, ceramic tiles and granite slabs. One sack of Renofix 5 STANDARD is mixed with 7 to 7,5 litres of clean water for 2 minutes. The minimum functional temperature is 5°C.
Technical Sheet
Renofix-5-Standard
READ MORE

Renofix 5 WHITE – CONSTRUCTIVE GLUE-CEMENT MATERIAL FOR LEVELLING

Is used for affixing insulation plates, as a material for levelling concrete surfaces and as an adhesive for levelling the Renotherm 50 thermal system. It can also be used as an adhesive for cement plaster on smooth concrete surfaces, stones, ceramic tiles and granite slabs. One sack of Renofix 5 WHITE is mixed with 7 to 7,5 litres of clean water for 2 minutes. The minimum functional temperature is 5°C.
Technical Sheet
ROFIX-5-Bardh
READ MORE

Renofix 15 – GLUE FOR STONE AND CERAMIC TILES ON WALL AND FLOOR SURFACES

An adhesive to be used for attaching stone and ceramic tiles onto wall and floor surfaces. To be used for inner and outer plastered surfaces with cement plaster, lime plaster, concrete surfaces or walls of gypsum plasterboard. The base should be clean, dry and the weight supported. It is mixed with a maximum of 7,5 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Store in a dry place.
Technical Sheet
Renofix-15
READ MORE